AIR-KING’S ESFGH Series Exhaust Fan/Light
26 watt high efficacy fluorescent lamp provides about the equivalent of 100 watts of incandescent lighting. 4 watt night light (bulb not included). Integrated humidistat senses the humidity level of the room and turns the fan on until the humidity level is below the preset percentage. Humidity level can be set up to 80% relative humidity and or Integrated motion sensor detects when the room is occupied and turns the fan on. Once the room is vacated, the fan continues to run for a preset amount of time to make sure proper ventilation has occurred. Sensor can be set from 30 seconds to 80 minutes. Single or two speed exhaust fans. 6" Round metal duct connector with spring loaded metal damper protects against back drafts and seals the duct better than any other damper on the market today. Boost feature ensures proper air delivery regardless of installation conditions (long duct runs etc). Perfect solution to meet ASHRAE 62.2 continuous whole house ventilation. Listed for installation over a tub or shower on a GFCI circuit. Welded galvanized steel housing includes adjustable hanger bar for easy installation. Side access panel allows you to wire the fan from inside or outside the housing. Fan ceiling flange seals the fan housing against the ceiling drywall to prevent air leaks.
Features: ESFGH SERIES ENERGYSTAR LISTED FAN/LIGHT COMBO 26 WATT FL BULB, SINGLE SPEED AND DUAL SPEED UNITS WITH HUMIDITY AND OR OCCUPANCY SENSING RATED FOR CONTINUOUS OPERATION, LOW SONE, BOOST SPEED. 1 spd. 80 CFM/ <0.3 sones, 130 CFM/ 0.4 Sones, 2 spd. 80/30 CFM / <0.3 Sones, 130/50 CFM / 0.4/<0.3 Sones.
More BUILT GREEN® Approved Products by Air-King Ventilation Products:
Contact Name: Lisa Grant
Contact Email: firstname.lastname@example.org
Manufacturer: Air-King Ventilation Products
BUILT GREEN® Checklist